Drum Remote Control Holder – 3d Print

Here’s how I 3d printed the Drum remote control holder

^{We might receive an affiliate commission if you purchase using links on our website. For more information click here.}

My hubby and I wanted to sort our remote controllers.

Then I designed the Drum remote control holder via Tinkercad and printed it.

I used OVERTURE Matte PLA Filament,1.75mm 3D Printer Filament, 1kg Spool (Matte White) to print it.

These are the steps below which I took to print it:

• I sliced the file with Cura software and then exported it to an SD card.
• I used soap and warm water to clean the glass bed, then dried it with a paper towel.
• Reinstalled the printer’s glass bed.
• After that, I checked to see if everything was working on my Ender 3 Pro 3D printer.
• I levelled the bed after placing the filament on the spool holder.
• I put the SD card in the printer. I turned on the printer, did an auto home, and set the temperature.
• By printing the chep bed file, I tested the printer’s bed level.
• I printed the file from TIF once it was ready to print.
• I kept an eye on the printer while it was printing.
• I waited for the printer to cool down before removing the print.
• The printer was auto-homed, and then turned the power button off.
• I removed the SD card from the printer.

Brain used Acyclic colors blue, yellow, and white to paint it.